LATERAL VERTICAL PRESSURE FILTER TYPE FCP 2-11 WORK A1, A2, A3

TECHNOLOGICAL CARD

CONNECTORS
N1: raw water inlet and washery effluent outlet, N2: treated water outlet and inlet of water and air for rinsing, N3: connector for automatic vent valve, N4: reserve connector, N5: release, M1: backfilling hole, M2: revisory manhole, W1: cleanout hole

BASIC FILTERS PARAMETERS

Type	Nominal diameter DN [mm]	Total height H [mm]			h1 [mm]	h2 [mm]	h3 [mm]		Connectors dn, dn’ [mm]	Filling holes a/b [mm]	Filtration surface P [m2]	Mass [kg]
Type	Nominal diameter DN [mm]	A1	A2	A3	h1 [mm]	h2 [mm]	A2	A3	Connectors dn, dn’ [mm]	Filling holes a/b [mm]	Filtration surface P [m2]	A1	A2	A3
FCP2	800	2463	2420	2337	300	824	2044	1974	50	176 / 256	0,50	290	295	300
FCP3	1000	2563	2521	2437	300	875	2094	2025	80	176 / 256	0,78	385	395	400
FCP4	1200	2715	2669	2540	350	925	2144	2025	100	176 / 256	1,13	525	535	540
FCP5	1400	2813	2772	2641	350	976	2196	2076	100	320 / 420	1,54	680	690	700
FCP6	1600	2967	2922	2741	400	1076	2246	2076	150	320 / 420	2,01	860	880	890
FCP7	1800	3067	3022	2841	400	1128	2296	2128	150	320 / 420	2,54	995	1020	1030
FCP8	2000	3171	3126	2945	400	1180	2348	2180	150	320 / 420	3,14	1445	1470	1485
FCP9	2100	3221	3176	2995	400	1205	2373	2205	150	320 / 420	3,46	1540	1570	1580
FCP10	2200	3271	3226	3045	400	1230	2398	2230	150	320 / 420	3,80	1675	1700	1710
FCP11	2400	3371	3326	3145	400	1280	2448	2280	150	320 / 420	4,52	1870	1900	1915
Note: Filters of parameters not included in series of types are produced according to individual arrangements. For the given parameters tolerances shall be taken consistent with existing rules.

USE
Vertical pressure vessels FCP A are one of basic devices of technological system of water treating. After filling with properly sellected filter bed and collaborating with hydropneumatic mixers and other technological devices they are mainly provided for removing iron and manganese compounds, turbidity, etc. from water.

FILTER CONSTRUCTION
In standard works all pressure filter elements (mantle, dished head, manholes, connectors, etc.) are made of low-alloyed certified steels. Maximum pressure PS=6bar and maximum temperature TS=50°C cannot be exceeded while exploiting the filter. Filter is protected against to corrosion by painting: internaly with polyester resins with PZH certification for contact with drinking water, externaly with universal temporal protective paint. Manufacturer allows using other internal varnish sets (eg. epoxy resins) and executions with external surface painting (eg. set of polyurethan paints) – for client's special wishes. Manufacturer can also offer devices with other anticorrosion protections eg. by: hot galvanizing, two-sided (for diameters not bigger than DN 1800 mm) spray galvanizing, one or two-sided (for bigger diameters) ebonit lining (rubbering) We also offer pressure filters made of austenitic steel. Filters of diameters bigger than DN 2000 are supported on 4 bearings. The angular location of side-connectors in work A2 or A3 is connected with the supportings. Filter in work A has lateral / pipe filtration system, made for filters of diameter DN 1400 mm in the shape of a star and for bigger diameters the laterals are placed in parallel. The filtering laterals are made of PVC with a filtration gap s=0,8 mm wide. The filtering heads – steel pipe constructions – galvanized. The manufacturer allows any constructional changes of a filter in the range of connectors' diameters and placing and the height of the cylindrical (filling) part.

NOTE

The manufacturer allows adaptation of the filter construction to the requirements of Technological Design of the Object.

NOTE

Filters FCP are subjected to the instruction 97/23/WE (PED). In accordance with it and its guidelines they are included to devices produced consistent with engineering practice. In particular cases filters are given the CE sign.
For our filters we have the PZH certificate which allows contact with drinking water.